LM GSA2250 : Safe Repair Plugs

GSA Safe Saver® Pins 
 
The GSA Safe Saver Pin was designed and developed 
specifically for both Black and Red Label for GSA equipment.
They are available in 1/4".  As with the regular Safe Saver Pins,
drilling a properly installed GSA Safe Saver Pin will be much
more difficult than any of the hardplate currently available.
  
ORDER CODE  -  LM GSA2250 (1/4" x 1/2")
  
Saver Saver® Pins
 
This Safe Saver Pin was developed to bring a container back to
its original security level or higher.  The pin is tapered at the end
at such an angle that it will properly fit into the hardplate without
extending beyond and interfering with the mounting of the lock.
Even the smallest of hole saws will not allow the removal of the 
carbide.  The ring grooves along the length of the pin are for easy
depth measurement so that the pin can be cut to the proper
 length prior to being seated into the hardplate.  This leaves 
 room for a weld on the outer surface and / or cosmetic work.
  
 This Safe Saver Pin is recommended for use on any UL rated safe.
 Installed properly, it will, without question, take the repaired hole 
 to a higher drill resistant level than the original hardplate.
   
 ORDER CODE  -  LM SSP2250  (1/4" x 2")
 ORDER CODE  -  LM SSP2312  (5/16" x 2")